AN-1104 series TDS
AN-1104 series TDS
Published in:2020-11-17 13:41:56    Clicks:0次    
AN-1104 series TDS


Zhongshan Brite Day Coating Raw Materials Co., Ltd.


Danan Industrial Zone, Gangkou Town, Zhongshan,

Guangdong, China Post code:528447


Tel0086-760-88411488 Fax0086-760-88411588



AN-1104 series



Product description


AN-1104 series is a thermoplastic polyurethane adhesive of high molecular weight. It offers key benefits such as good pigment wetting, excellent adhesion to a wide variety of substrates ( including flexible films such as Polyolefins, Nylon, PET, etc. ), low solvent retention, good yellowing resistance, good heat stability, and outstanding lamination bond strength and excellent blocking resistance.



Typical physical and chemical data


Appearance :

Liquid, light yellow and clear

Solid content ( wt% ) :


Color ( Fe-Co color standard) :

≤ 3

Viscosity ( mPa·s, at 25°C ) :

200 - 1300

Amine value ( mg KOH / g ) :

≤ 2

Solvent used in resin :

ethyl acetate/ Isopropanol



Solubility and Compatibility


1. Good compatibility with vinyl chloridevinyl acetate copolymers.

2. Good pigment wetting and dispersion properties, better for blue and black inks.

3. Excellent leveling, transferring overprinting and good color saturation.

4. Good adhesion to various substrates (PET, OPP, Nylon, etc.).




AN-1104 series is recommended as a binder for solvent based reverse print lamination inks including applications where boiling resistance and retorting resistance are required. It is suitable for inks to be formulated with it as the main binder, and with or without solvents such as toluene or commonly used ketones for gravure lamination printing. AN-1104 series is also suitable for plastic coatings.


Standard packing


190 kg / drum.




Attention must be paid to the normal precaution for handling chemicals and to the measures prescribed in the local health regulations. The work-place must be well ventilated, and appropriate protective measures should be adopted when working with the resin.




We strongly recommend AN-1104series be stored indoors at temperatures between 5- 25°C. Exposure to sunshine should be avoided. Under the mentioned storage conditions the stability of the resin is at least 6 months.




The information submitted in this data sheet is based on our current knowledge and experience. The data given does not relieve processors of the responsibility of carrying out their own tests and experiments; neither does it imply any legally binding assurance of certain properties or of suitability for a certain purpose.

Copyright©Zhongshan Brite Day Coating Raw Materials Co.,Ltd.

Contact number:0760-88411488Company address:No. 5, Shengde Road, Port Town, Zhongshan CityRecord number:ICP no. 18013042-1